NHOU® Black Rust Prevention Oil Coating Spray – 400ml Aerosol

NHOU® Black — Transparent Rust Prevention Oil Coating (400ml Aerosol)

Convenient spray-format corrosion protection — the ideal solution for underbody sections, wheel arches, suspension components, frames, and welded seams without needing a compressor or specialized equipment.

NHOU® Black is a penetrating oil formulation engineered to protect metal against moisture, road salt, and dirt. It not only seals and stops existing rust from spreading, but also restores treated parts with a clean, uniform black appearance. The aerosol format is perfect for local repairs, targeted touch-ups, and routine maintenance.

Key Benefits

• Black Protective Finish: Gives chassis sections, frames, and wheel arches a clean, uniform black appearance.
• Deep Penetration: The oil formula creeps into micro-cracks, seams, joints, and metal overlaps, effectively displacing moisture.
• Ready to Use: Aerosol format requires no air compressors, spray guns, or setup time — apply directly from the can.
• Corrosion Shield: Reliably insulates metal against aggressive road salt, moisture, and road grime.
• Ideal for Touch-Ups: Extremely practical for quick protection of repaired zones, spot treatments, and periodic maintenance.
• For Pros and DIYers: A practical tool for both commercial workshops and vehicle owners doing home maintenance.

Carlat.com — Official NHOU® Distributor in Europe

We supply authentic NHOU® products directly from the manufacturer to professional workshops, commercial fleets, and retail customers throughout Europe.

Recommended Applications

Ideal for targeted work, rapid repair, and routine maintenance of accessible metal surfaces:

• Underbody touch-ups and wheel arch protection
• Suspension components, control arms, springs, and frame rails
• Welded seams, joints, folded edges, and metal overlaps
• Passenger cars, SUVs, commercial vans, and heavy equipment
• Agricultural machinery, trailers, motorcycles, and garden tools
• Exposed structural metal and workshop equipment

Product Specifications

Application Guide

1. Surface Preparation: Remove dirt, oil, loose flaking rust, and damaged coatings.
2. Mixing: Shake the aerosol can thoroughly before use and periodically during application.
3. Spraying: Hold the can approximately 15–20 cm from the surface and apply an even coat.
4. Layering: Apply a second coat to high-wear areas if necessary.
5. Critical Areas: Pay special attention to welded seams, joints, overlaps, and suspension parts.
6. Maintenance: Inspect treated areas periodically during routine checks and reapply as needed.

View Safety Data Sheet